Smoke damage cleaning is a vital part of fire restoration. Without it, lingering smoke odours can be difficult to remove and can leave surfaces discoloured with a corrosive residue.
It’s important to use protective equipment during the cleaning process as smoke particles can carry harmful toxins. This includes wearing a respirator and safety uniform.
Removing Soot and Smoke Particles
Soot is a thick substance that carries many harmful chemicals, metals and soils. It is acidic and can damage all surfaces it comes in contact with. If it is not removed immediately, it can etch into porous materials. It can also discolor walls and ceilings, and linger in the air as a stale stench.
It is important to open all windows and use fans in order to ventilate the area. This can make it easier to clean the stains from the walls and will also help prevent them from reoccurring in the future.
Using a heavy-duty vacuum cleaner is one of the best ways to remove loose soot particles from the surface of walls. It is also important to avoid using water as this will only make the stains more difficult to remove and can cause further damage. If you must use water, be sure to test it in a hidden area first. It is also a good idea to wear rubber gloves.
When soot and smoke particles settle on floors, walls and ceilings, they can cause a corrosive effect. This can be particularly harmful to surfaces such as hardwood, laminate and linoleum, as well as wallpaper and paint. Nova Clean, a specialist fire and smoke damage restoration company in London, offers a full range of cleaning services to tackle smoky residue and lingering odours. Using specialist hepa filter vacuum cleaners, the team sucked up loose soot from the bungalow’s flooring. They then employed a deodorising and sanitising agent to remove smoke damage from walls and ceilings. This was followed by thermal fogging, a process that fills each room with a vaporised deodorising agent to neutralise unpleasant odours.
When a property has been affected by smoke damage, the first thing to do is make sure that any loose soot is removed. This is most effective with a special dry-cleaning sponge, which is specially designed for smoke restoration work. It can be used in conjunction with a degreasing solution or white vinegar in warm water.
Once this step is complete, you can begin to clean the walls. It is important to work on small areas at a time to prevent streaks and stains. It is also a good idea to rinse the area thoroughly when you have finished, in order to remove any remaining cleaning products.
Remember to check the ceilings for any signs of damage too. They may need to be sanded down and repainted. Also don’t forget to look at porous surfaces like carpets and curtains – these will need specialist cleaning with ozone treatment and thermal fogging. This will ensure that all materials are fully decontaminated, and the smell of smoke is neutralised.
Wallpaper can suffer from a variety of issues over time, from dust to grease stains and mildew. Wallpaper should be dusted regularly, particularly in high traffic areas, and stains or spots should be cleaned immediately to prevent them from becoming permanent marks.
For stains on wallpaper, you should mix a small amount of clear soap (like dish soap) with warm water in a bucket. Dip a sponge or cloth in this solution and wring out any excess to avoid saturating the wallpaper with water. You should also test your cleaner in an inconspicuous area, such as behind a couch, to see how the wallpaper reacts and to ensure that it does not cause any damage. Wipe the stain off using gentle, downward motions, being careful not to tear or loosen conjoining edges. Rinse the area and dry it thoroughly. Repeat this process as needed until the stains are gone.smoke damage cleaning london